Single Channel - Inductive Loop Vehicle Detectors with Built-In Diagnostics Utilizing Non-Volatile Memory.

• Advanced Diagnostics: Low Voltage, Open Loop, and Shorted Loop Conditions.
• Non-Volatile Memory insures loop diagnostics are not lost when power is removed.
• Automatic Reset Internal Fuse (24 VAC versions only), provides fuse & circuit protection.
• Detect Memory helps prevent detection drops during short power interruptions.
• Sensitivity Boost, for gate operation where high profile vehicles might be encountered.
• 2-Second CALL Delay.
• Dual Programmable relays offer selectable modes of operation:
  • Output A: True Presence™ (Infinite) or Limited Presence.
  • Output B: Presence or Pulse on Entry or Pulse on Exit.
•  FAIL-SAFE and FAIL-SECURE versions available.
• 4 loop frequencies selectable from the front panel.
• 8 levels of sensitivity.
• Super bright LEDs provide separate power, DETECT, & loop FAIL indications.
• 11 pin rear "Amphenol" and 10 pin rear "MS" connector versions available.
• Configurations available: 24 VAC, 120 VAC, 240 VAC, 12 VDC, & 24 VDC.

DSP-7 Microdetector This new vehicle detector is available with a NO and a NC relay output.  

And it works on any voltage between 7 and 30 volts.......... AC OR DC!!!

The DSP-7 vehicle detector has been specifically designed to handle gates, parking, drive-through and other access control applications.  At last, one detector for all your voltages and all your applications!    

• DSP-5LP Ultra-Low Power Microdetector   Some people rate their low power detectors in milliamperes.  We rate this one in  microamperes!  This ultra low power vehicle detectors is perfect for solar powered gate installations.  This 12 volt DC detector draws about 500 microamperes (1/2 milliampere) while waiting for a car.  This beats all competition for  "no car" current consumption.  Like the DSP 7 above, this detector has both the NO and the NC output relay contacts.    Works on all safety, free exit, and all other gate and access control applications that require extremely low current draw from the 12 volt battery.   The detector's small size and lack of any switches or dials, sets the industry's new standard for low power solar applications.