|
|
| |
Mfg. High Traffic Commercial Gate Operators
|
|
| |
|
|
Standard Features
|
| |
- Built in battery backup power source
- High torque 1/2 HP 24
Volt DC Motor
- Microprocessor (RISC)
control board
- Open on power loss with
15 sec. delay
- Anti-tail gate with
quick close close feature
- Molded Polyethylene
Cover UV stable
- Unique "clam shell"
cover design
- IRD senses open and
close obstructions
- Rust proof aluminum
alloy chassis
- Soft start and stop
when in motion
- 13-15 second open/close
time
- Dynamic motor braking-electronic
- Configurable as master
or slave
- LED input and diagnostic
indicators
- Mosfet motor drive-no
contactors
- Safe low voltage control
circutry
- Maximum run timer (MRT)
- U.L. Listed (U.S.),
C-U.L. Listed (CANADA)
- UL-325, UL-991, UL-746C
- CLASS, 1,2,3,4
|
|
Design Features |
| |
- Emergency
Release (HARDENED
STAINLESS STEEL)
- Non-scissor
arm design
- Universal
controller with 8 inputs
- Inputs
include: open, close, single button, safety, free exit & shadow (under
gate loop)
- Microprocessor
(RISC) Electronics
- Right
or left handed operation
- Anti-tailgate
& quick close feature
- Ability
to auto open when power fails
- Tranzorb
surge protection on inputs
- Closing
timer adjustable 1-33 seconds
- Relay mag-lock or
interface
- Open/close
13-15 seconds
- Room
for future overdrive CPU
- Extra
large enclosure for detectors and batteries
|
|
| |
|
|
Specifications |
| |
- 1/2 HP permanent magnet 24
VDC motor
- 110 1220 VAC AT 4 / 2 AMPS
MAX, 50/60 HZ
- Regulated 24VDC 500 MA accessory
power
- Battery backup for accessory
power
- Continuous duty (FREE MOVING
LEVEL GATE)
- Heavy duty size:: 80 900:1 ratio gear reducer
- Max 600 lbs. at18 FT
- Cover: grey high impact Polyethylene
- Chassis: 3/8 inch T6 aluminum
alloy
- Chassis finish : gloss white
powder coat
- All aluminum drive arm
- Physical: Weight = 105 lbs.
- Height = 25" - Width = 18.25"
- Depth = 20"
- Convenient duplex outlex (120
VAC)
- ON/OFF AC power switch
|
|
| |
|
|
|
