| |
| |
| |
| |
About
the MGR20 and MGS20... Designed
specifically for easy installation on standard 2" round
or square frames, the MGR20 and MGS20 offer 3-sided activation
for an added measure of protection. When touched, these
electrically activated edge sensors immediately signal the gate
operator to stop and reverse. The sleek design will not
detract from the appearance of the gate. |
|
| |
Specifications |
|
| |
(Click image for .pdf download)
|
Color: Black
Length: per specification to nearest º"; maximum
length is up to 10 feet
Sensitivity: nominal 4 psi
Lead Wire: SJTO, 18 gauge, 10 ft. length
Wire Outlet Location: specify universal, right, or
left side
Electrical Requirements: 24 volt AC or DC, ý amp
Electrical Diagram: 2 wire N.O. configuration
Contact Element: Alumaglas®
Materials: Base = rigid extruded PVC; Cover = flexible
PVC
Temperature Range: -30ºF to +155ºF |
|
| |
ME120
and MGO20 |
| |
| |
About
the ME120 and MG020...
When touch activated, these pressure
sensitive edges immediately send an electrical impulse to your
controls to start, stop and/or reverse operations. Designed
for use in a wide variety of applications, these SensingEdges
are extremely durable and can be used indoor or out. They
are resistant to water, flame and common greases and oils.
|
|
| |
Specifications |
|
| |
(Click image for .pdf download)
|
Color: Black
Length: per specification to nearest º"
Sensitivity: 4 psi - standard
Activation: Orange arrows indicate direction of sensitivity
Lead Wire: 10 ft. SJTO 18 gauge - standard
Wire Outlet Location: specify right-hand, left-hand
or end
Electrical Diagram: 2 wire N.O. configuration
Electrical Requirements: 24 volt AC/DC ý amp
Contact Element: Alumaglas®
Channel: Black extruded PVC or Aluminum
Sensing Edge: Extruded flexible PVC
Temperature Range: -30ºF to +155ºF |
|
|
