Standard Features

• Motor 24V DC, 12 amp
• Cycles 100 cycles per day
• Torque 600 lbs. of torque
• Finishing Aluminum
• Dimensions L 39 1/2", W 3 1/2", H 4"
• Installation Can be installed two ways: Open inside Close outside or Open outside Close inside

• Output Shaft 1"
• Shipping Weight Single: 58 lbs. Master/Slave: 89 lbs.
• Capabilities Maximum gate size 15' wide, 600 lbs.
• Travel Speed 14 to 18 seconds 90 degree opening

• Running System Microcontroller with built in watchdog system
• Modular Board Uses LED's to indicate all input and output functions of the gate operator.
• Sensor When the gate makes contact with and object while opening, it will reverse a few inches and then stop. If the gate makes contact with an object while closing, it reverses and then opens.
• Timer Can be set from 0 - 60 seconds, or can function as a "push-open/stop/close" type of operation.
• Master/Slave Dictates synchronized movement between two gate operators.
• Safety Loop Input Anti-tailgating system uses a "stop only" Method of operation. Will not work as a commercial loop system.

• Alarm Output Can be interfaced with any home alarm system. Alarm will sound if the gate is forced open manually. Optional siren speaker can be installed within the control box.
• Spike Suppressors Protected by spike suppressors.
• Alternate Outputs Master/Slave, alarm system, and magnetic lock interface.
• Electronic Inputs Any type of radio receiver, full-control system "push-open/stop/close", saftey loop, photocell, telephone entry, and key switch.
• Control Board Housing DIM L 10 1/2" - W 4 1/4" - H 12".
• Housing Finish Gold-zinc plated. Powder coated.